手机app软件下载

Contact
Go TO Top

FAQ

Q
Precised Planetary Gearbox Installation Guide

Follow the steps below for installing of precised planetary gearbox with Servo motor / Stepper motor

 

Step 1

Checking the conformity of mounting side dimension on planetary gearbox with servo motors' output flange and shafts.

mounting side dimension on planetary gearbox with servo motors' output flange and shafts.

 

Step 2

Remove the black stopper on mounting hole, then Lossen both the hexagonal bolt on input hollow shaft(bore) by hexagonal wrench.

losing the hexagonal bolt of input hollow shaft by hexagonal wrench.

 

Step 3

Remove the key from keyway on the servo (stepper) motor

Remove the key from keyway on the servo (stepper) motor

 

Step 4

Clean and remove any dust or particales on the mounting surfaces of planetary gear box and servo motor

Clean and remove any dust or particales on the mounting surfaces of planetary gear box and servo motor

 

Step 5

Check the dimension of  the output shaft of servo motor before installing; if sleeve is needed, please pre installed it into the input hollow shaft(bore) of the planetary gearbox.

Check the dimension of  the output shaft of servo motor before installing; if sleeve is needed, please pre installed it into the input hollow shaft(bore) of the planetary gearbox.

 

Step 6

Install the servo motor vertically into the mouting side of planetary gearbox.

Install the servo motor vertically into the mouting side of planetary gearbox.

 

Step 7

Tighten the screw by adjustable wrench between planetary gearbox and servo motor.

Tighten the screw by adjustable wrench between planetary gearbox and servo motor.

 

Step 8

Tighten both the hexagonal screw of input hollow shaft(bore) on planetary gearbox by hexagonal wrench.

Tighten both the hexagonal screw of input hollow shaft(bore) on planetary gearbox by hexagonal wrench.

 

Step 9

Use a torque wrench to check the if the hexagonal screw is tighten

Use a torque wrench to check the if the hexagonal screw is tighten

 

Step 10

Replace the black stopper back to the mounting side of planetary gearbox.

Replace the black stopper back to the mounting side of planetary gearbox.

 

For more information on planetary gear gearboxes products, visit our products page or contact Varitron.

Design by
手机版集结号捕鱼游戏 怎么购买手机赌博软件 手机棋牌输了几百万 怎么样进入赌单双软件 手机版彩票过滤工具 快钱彩票官网 怎么上岸 怎么举报网络彩票 成功彩店官方网站 怎么下载波克棋牌